User Setting Mode; User Lens Mode Ratio Setting - Oce CS520 User Manual

[3] User Setting Mode

[3] User Setting Mode

Set the user-set magnification ratio.

[1] User Lens Mode Ratio Setting

The preset and userset ratios available on the Basic Screen are used to reduce and
enlarge the original image to accommodate copy paper size.
Normally, users are allowed to change the three USERSETs in the bottom line on the
User Lens Mode Ratio Setting Screen. The preset keys in the top and middle lines
can be programmed in 2-5 DIP SW mode for special purposes, but ordinarily, it is
recommended that they remain unchanged.
Default setting:
- USERSET1: 4.000
- USERSET2: 2.000
- USERSET3: 0.500
User Setting Mode Menu Screen
Procedure
1 Touch [3] User setting mode
[1] User lens mode ratio setting
2 Touch
Setting Screen.
3 Touch the USERSET
using the keypad.
If a ratio under 0.250 is entered, 0.250 will be displayed.
If a ratio over 4.000 is entered, 4.000 will be displayed.
4 Touch OK to complete the setting and return to the User Setting Mode Menu
Screen, or touch
PREVIOUS SCREEN
5 Touch
14-410
to display the User Setting Mode Menu Screen.
you want to change, then enter a ratio from 0.250 ~ 4.000,
CANCEL to restore the previous setting.
to restore the Key Operator Mode Screen.
User Lens Mode Ratio Setting Screen
to display the User Lens Mode Ratio