Oce CS520 User Manual page 284

Transmitting/Editing Machine Setting File
Click on [ Close
5. Edit the machine setting file.
The machine setting file transmitted to a PC is a TAB separated text file which
can be edited using an application software such as Text Editor or Table Editor.
A new setting file can also be created according to the specifications for each
file type. See p. 10-281 for details.
6. Import the machine setting file.
Click on [ Browse
click on [ Import
The result message will be displayed when the registration is completed.
Error Message
If the registration cannot be completed successfully, error messages will be
displayed as follows.
• Can't transfer data (The machine is busy)
Try again to import the data after the machine operation in progress is
completed.
• The data cannot be recognized
Confirm that the data is the machine setting file.
• Data size is too large
Confirm that the data is the machine setting file.
Check if the file size exceeds 100,000 bytes.
10-284
].
] to designate the machine setting file to be imported, then
].