Table of Contents
Advertisement
Selecting Paper Size
Selecting Paper Size
To select an appropriate paper size for getting your desired copy result, use APS
(Automatic Paper Selection), or select paper size manually on the touch screen, as
required.
To Select Paper Size Automatically (APS)
APS detects the size of originals placed on the RADF or platen glass and
automatically selects and feeds copy paper of the same size, or selects an
appropriate size according to the magnification ratio selected.
APS is not available when using non-standard size or wide size paper.
1.
Touch to highlight
Screen.
2.
Select additional copy conditions, as desired.
3.
Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
4.
Position original(s).
• See p. 12-370 for the original sizes detectable from the RADF or on the
platen glass.
• Detectable original sizes can be changed from AB sizes to inch sizes, only
A sizes, or AB sizes and inch sizes mixed. See p. 14-436.
• See p. 3-70 for details on positioning originals.
• Key Operator can deactivate APS when the original is set in the RADF or
on the platen glass. See p. 14-436.
START
5.
Press [
Scanned image will be printed on the paper size automatically selected.
3-82
APS
under the PAPER SIZE on the Basic
].
Advertisement
Table of Contents
Troubleshooting
