Oce CS520 User Manual page 438

[13] Memory Switch Setting
SW No. Item
No. 46: Screen (Monochrome - Photo)
No. 47: Screen (MonoColour - Text/
Photo)
No. 48: Screen (MonoColour - Photo)
No. 49: Colour gamut
No. 50: Auto select binding mode
No. 51: State of Platen/RADF (Reset)
No. 52: Time lag to switch tray
No. 53: Printer Non STD centring
No. 54: Scan E-Mail Form default
No. 55: Scan FTP Form default
No. 56: LCT air assist fan
No. 57: Exit cooling fan (No finisher)
No. 58: Finisher operating (Thick)
Key Operator Mode Screen
Procedure
1 Touch [13] Memory switch setting
Screen.
2 To select the desired item, touch the arrow keys (+) and (,) at the right of the
Memory Switch Setting Screen to highlight it.
To scroll, touch the arrow keys at the lower left corner of the screen.
3 To change the setting of the highlighted item, touch
repeatedly till the desired setting is displayed.
Repeat above steps
4 Touch PREVIOUS SCREEN
Key Operator Mode Screen.
The following functions can be provided by the Memory Switch settings.
14-438
to display the Memory Switch Setting
2 to 3 to make several changes in succession.
on the Memory Switch Setting Screen to restore the
Setting (default is underlined)
HighCompression / LineScreen-
HighResolution / LineScreen-
SmoothTone / DotScreen-
HighResolution / DotScreen-
SmoothTone
HighCompression / LineScreen-
HighResolution / LineScreen-
SmoothTone / DotScreen-
HighResolution / DotScreen-
SmoothTone
HighCompression / LineScreen-
HighResolution / LineScreen-
SmoothTone / DotScreen-
HighResolution / DotScreen-
SmoothTone
Normal / Wide
OFF / ON
Not keep / Keep
Short / Standard
OFF / ON
PDF / TIFF / JPEG
PDF / TIFF / JPEG
AUTO / ON / OFF
ON / OFF
Prefer Image Quality / Prefer Speed
Memory Switch Setting Screen
Change Setting Contents