Oce CS520 User Manual page 323

OK
3. Touch on the Application Selection Screen.
The Basic Screen will be restored.
4. Touch a mode key under the COLOUR MODE on the Basic Screen.
Selecting SINGLE COLOUR will display the popup menu to specify a colour.
Touch desired colour key, then touch OK.
The selected colour will be indicated under the COLOUR MODE indication of
the Basic Screen, with the SINGLE COLOUR key highlighted.
5. Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
6. Position original(s) FACE UP in the document feeder or FACE
DOWN on the platen glass.
For details on positioning originals, see p. 3-70.
START
7. Press [
When the finisher / paper exit tray capacity is exceeded due to the
print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
Reversing Colour in Image (Reverse Image)
].
11-323