Oce CS520 User Manual page 245

OK
3. Touch to complete the setting and return to the Basic Screen.
The SPECIAL ORIGINAL key on the Basic Screen is highlighted, and the icon in
the message area indicates the selected original direction.
4. Make other compatible selections.
5. Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
6. Position originals FACE UP in the document feeder or FACE
DOWN on the platen glass according to the original direction
specified in step
See the illustration on previous page, and p. 3-70 for details on positioning
originals.
START
7. Press [
When the finisher / trimmer unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied sets
as they exit; otherwise, mishandled paper will occur.
2
.
].
Specifying Original Direction
9-245