Oce CS520 User Manual page 325

Repeating Selected Image Area (Repeat: Vert./Horiz. Mode)
The Repeat Mode Selection Screen will be displayed.
MANUAL
3. Touch
the scanning area.
Use up/down arrow key to enter the width from 10 to 150 mm in 1 mm
increments. Keep touching the key to increase/decrease the value
continuously.
Or, touch ENTER REPEAT WIDTH USING KEYPAD
menu to enter the value from the touch screen keypad.
Touch VERTI. WIDTH
OK to restore the Repeat Mode Selection Screen.
OK
4. Touch .
The Application Selection Screen will be restored.
OK
5. Touch on the Application Selection Screen.
The Basic Screen will be restored.
6. Select the desired magnification and paper size.
• APS and AMS are automatically released, and 1.000 (100%) is selected as
a magnification ratio.
• Copy mode is automatically set to 1)1. If 1)2 is selected, Platen store
mode will function automatically.
, then specify the vertical and horizontal widths of
or HORIZ. WIDTH
to display the popup
, enter the value for each, then touch
11-325