Oce CS520 User Manual page 439

[13] Memory Switch Setting
[1] Auto reset timer
Set the reset interval starting from the completion of a copying job until the machine
returns to the initial condition.
[2] AUTO RESET key function
Set the condition of the following modes when [ AUTO RESET ] is pressed: Copy
mode, Copy density, Magnification, Tray selection.
[3] RADF-Original effect
Set the machine condition when original is set on RADF in non-RADF mode with
RADF unit closed.
[4] Job memory auto recall (30)
Job memory number 30 is automatically recalled when power is turned on or when
Auto-reset is restored.
This job recall function works only when Job number 30 is registered.
[5] Finisher mode by Full-auto
Set the Output Mode to be recalled when [ AUTO RESET ] is pressed.
[6] Initial by Key counter insert
Set the machine to return to the initial state when Key counter is inserted.
[7] Erasure outside area of original
Set the machine to delete the outside area of originals.
[8] RADF frame erasure selection
Set Frame erasure to function anytime in RADF mode.
[9] Automatic tray switching
When paper is depleted during a copying job, the copier continues copying by
switching to another tray that contains the same size paper.
[10] Platen APS
The copier automatically selects the same size copy paper as the original placed on
the platen glass. (In reduction or enlargement mode, an appropriate paper size is
selected according to the ratio selected.)
[11] RADF APS
The copier automatically selects the same size copy paper as the original placed on
the RADF. (In reduction/enlargement mode, an appropriate paper size is selected
according to the ratio.)
[12] Platen AMS
The copier detects the size of the platen original and selects the appropriate
magnification ratio to correspond to the selected paper size.
[13] RADF AMS
After detecting the original size placed on the RADF the copier automatically selects
an appropriate ratio for the copy when paper size is selected manually.
[14] Select tray when APS cancel
Select the tray to be automatically selected when APS is released.
[15] Platen original size detect
Select the series of the original paper size detected from the platen glass.
14-439