Oce CS520 User Manual page 255

Scanning Thin/Thick Originals in RADF (Original Thickness)
6. Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
7. Position original(s) FACE UP in the document feeder.
• See p. 3-70 for details on positioning originals.
• Use RADF store mode (p. 3-104) when the original count exceeds 100.
START
8. Press [
When the finisher / trimmer unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied sets
as they exit; otherwise, mishandled paper will occur.
].
9-255