Non-Image Area Erase Setting - Oce CS520 User Manual

[19] Non-Image Area Erase Setting

[19] Non-Image Area Erase Setting

Select the original density level of Non-Image Area Erase function to be in effect
when this feature is selected on the Application Selection Screen after power is
turned on or after Auto Reset occurs.
Key Operator Mode Screen
Procedure
1 Touch [19] Non-image area erase setting
display the Non-Image Area Erase Setting Screen.
AUTO
2 Touch to let the machine select the density level automatically, or
manually select the density level from the five exposure levels provided on the
screen.
3 Touch OK to complete the setting and restore the Key Operator Mode Screen, or
touch CANCEL
14-450
to restore the previous setting.
Non-Image Area Erase Setting Screen
on the Key Operator Mode Screen to