Oce CS520 User Manual page 69

When starting a new copying job, be sure to close the RADF securely, then
press [ AUTO RESET
FULL COLOUR
The initial settings may have been altered by Key Operator. See p. 14-409 for
details.
Selecting SINGLE COLOUR
Touch the desired colour key, then touch
The selected colour will be indicated under the COLOUR MODE indication of
the Basic Screen, with the
CANCEL
Touch
2. Select additional copy conditions, as desired.
If the colour adjustment is desired, see Section 7: "Colour Image
Adjustment".
3. Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
4. Position original(s).
See p. 3-70 for details on positioning originals.
5. Press [
START
].
is already highlighted when the initial settings are restored.
will display the popup menu to specify a colour.
SINGLE COLOUR
to restore the previous setting.
].
Selecting Colour Mode
OK .
key highlighted.
3-69