Oce CS520 User Manual page 100

Making Double-Sided Copies (1)2, 2)2)
4. Touch 1)2 on the Basic Screen to highlight it.
The STORE key will be automatically highlighted on the screen.
DO NOT press [
be released to disable the copier from scanning the original placed on the
platen glass.
5. Select additional copy conditions, as desired.
Some incompatible conditions may automatically release the selected copy
mode. In this case, arrange the settings so that they are compatible with the
selected copy mode.
6. Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
START
7. Press [
The front side image of the double-sided copy will be scanned into memory.
8. Replace the original on the platen glass with the back side image
original, then press [
Repeat this step until all originals are scanned.
• Memory indicator on the upper right of the Basic Screen allows you to
check the remaining memory.
• To delete the scanned data without printing, press [
details.
9. After all originals are scanned, touch
mode.
STORE will no longer be highlighted.
START
10. Press [
All the data in memory will be output.
3-100
AUTO RESET
] to scan.
START
].
] to print.
] at this point, otherwise the platen mode will
STORE
STOP
]. See p. 3-81 for
to exit the Store