Checking Feature Selections / Proof Copying (Check Mode) - Oce CS520 User Manual

Checking Feature Selections / Proof Copying (Check Mode)

Checking Feature Selections / Proof Copy-
ing (Check Mode)
Use the Check mode to confirm copying selections before starting print operation.
In this mode, use Proof copy to produce a sample of the copied set before making
multiple copies. This is a convenient and cost effective way of viewing the results of
the following copying selections.
• Copying conditions using Store mode • Booklet
• Sheet/Cover Insertion
• Chapter
• Combination
Specifications for Check Mode and Proof Copy
/ Proof copy is available when using RADF, or Platen store mode for multiple
originals.
/ Proof copy is unavailable with Group output mode.
1. Select the desired copy conditions and enter the desired print
quantity.
When starting a new copying job, be sure to close the RADF securely, then
AUTO RESET
press [
2. Position original(s).
See p. 3-70 for details on positioning originals.
CHECK
3. Press [
The Check Screen will be displayed.
4-130
].
] on the control panel.
• Image Insert
• Dual Page
• Program Job