Copier Initial Setting - Oce CS520 User Manual

[2] Copier Initial Setting

Initial settings are the settings that display automatically when the copier is
powered on, when Auto Reset timer or Power Saver is operated, when the EKC
password is entered, when the key counter is set, or when [
pressed.
Initially, i.e., at installation, the Basic Screen displays the following condition to meet
Energy Star requirements:
Colour Mode:
Copy Mode:
Paper Size:
Lens Mode:
Output Mode:
NOTE:
The most commonly-used settings are established at installation. Before
changing any of the copier settings, be sure that you understand the overall
and long-range effect of the change.
Key Operator Mode Screen
Procedure
1 Touch

[2] Copier initial setting

2 Make a selection for each mode as initial settings.
Touch RADF to select or deselect it.
NOTE:
The machine will restore the initial settings specified as above unless the
Memory switch No. 4 "Job memory (30) auto recall" is turned ON with the
Job memory No. 30 registered.
OK
3 Touch to complete the setting and return to the Key Operator Mode Screen,
or touch CANCEL to restore the previous setting.
Full colour
1-1
APS
1:1
Offset sort
to display the Copier Initial Setting Screen.
[2] Copier Initial Setting
AUTO RESET
Copier Initial Setting Screen
] key is
14-409