Oce CS520 User Manual page 340

Reducing Images to Create Binding Margin (Reduce&Shift)
OK
5. Touch .
The Application Selection Screen will be restored.
OK
6. Touch on the Application Selection Screen.
The Basic Screen will be restored.
7. Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
8. Position original(s) FACE UP in the document feeder or FACE
DOWN on the platen glass.
For details on positioning originals, see p. 3-70.
START
9. Press [
When the finisher / trimmer unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied sets
as they exit; otherwise, mishandled paper will occur.
11-340
].