Repeating Selected Image Area (Repeat: Vert./Horiz. Mode) - Oce CS520 User Manual

Repeating Selected Image Area (Repeat: Vert./Horiz. Mode)

Repeating Selected Image Area (Repeat:
Vert./Horiz. Mode)
Use this function to repeat the selected image area of 10 mm ~ 150 mm in both
vertical and horizontal widths measured from the rear left corner of the A3 original
area indicated on the left edge of the platen glass.
Vertical/Horizontal Width Setting Mode Specifications
/ Use the platen glass. (Document feeder cannot be used.)
/ Incompatible Conditions: Using RADF, 2)2, 2)1, APS, AMS, Group,
Rotation Sort, Rotation Group, Mixed Original, Z-Folded Original, Sheet/
Cover Insertion, Chapter, Combination, Booklet, Image Insert, Dual Page,
Multi-Page Enlargement, Non-Image Area Erase, Reverse Image, Frame/Fold
Erasure, AUTO Layout, Reduce&Shift in Image Shift, Stamp/Overlay
Horizontal width
APPLICATION
1. Touch
When starting a new copying job, be sure to close the RADF securely, then
press [ AUTO RESET
Repeat
2. Touch
11-324
Vertical/Horizontal Width Setting mode
Vertical
width
on the Basic Screen.
].
on the Application Selection Screen.
Repeat copy