[8] Key Operator Data Setting
[8] Key Operator Data Setting
Use this screen to enter the name and extension number of the Key Operator
indicated on the Help Screen that develops from the Basic Screen.
Key Operator Mode Screen
Procedure
[8] Key operator data setting
1 Touch
Screen.
2 Touch
Name
to highlight it, then enter the key operator name up to 8 characters
from the touch screen keypad.
3 Touch
Key Operator Tel. No.
number from the touch screen keypad. If the extension number is less than 5
digits, use a hyphen [-] to make it five. The hyphen added in the beginning will be
indicated as a space on the Help Screen.
OK
4 Touch
to complete the setting and return to the Key Operator Mode Screen,
or touch
CANCEL
14-424
to highlight it, then enter a 5-digit extension
to restore the previous setting.
Key Operator Data Setting Screen
to display the Key Operator Data Setting