Table of Contents
Advertisement
2.
Select the binding mode.
Touch
OUTPUT MENU
popup menu, then touch the desired binding mode key to highlight it.
Selecting
RIGHT&LEFT BIND
while
Touch
OK
to return to the Basic Screen.
3.
Position original FACE DOWN on the platen glass according to the
original direction, then close the document feeder or platen cover.
Be sure to start from the first page.
• See p. 12-370 for paper sizes detectable on the platen glass.
• See p. 3-74 for details on positioning originals.
• Use Non-Image Area Erase to prevent the black copy marks to be
produced when scanning the original with the document feeder or platen
cover open. See p. 11-320.
Making Double-Sided Copies (1)2, 2)2)
on the Basic Screen to display the Output Mode
TOP BIND
will make copies upside down on the reverse side,
copies normally.
Binding mode
Copies
3-99
Advertisement
Table of Contents
Troubleshooting
