Oce CS520 User Manual page 229

5. Select additional copying features, as required.
NO COVER SHEET
To change this selection, touch
display the Application Selection Screen, then touch
the Booklet Mode Selection Screen to make another selection or to release
the setting.
6. Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
7. Position originals.
See p. 3-70 for details on positioning originals.
When loading originals, heed the following limits on capacity:
Fold mode:
12 pages or less for simplex copying
6 pages or less for duplex copying
Stitch & Fold mode:
80 pages or less for simplex copying (80 g/m
40 pages or less for duplex copying (80 g/m
Exceeding the above capacity limits may cause trouble in the Finisher.
START
8. Press [
When the Trimmer unit tray capacity is exceeded, the Finisher and
Trimmer unit will cease operating. To avoid this, select the
appropriate print quantity from the specifications shown on p. 8-227.
Making Trimmed Booklets (Trimming)
of Booklet is initially selected.
].
APPLICATION on the Basic Screen to
2
paper only)
2
paper only)
Booklet twice to display
8-229