Oce CS520 User Manual page 337

Adjusting Position of Copy Image (Image Shift)
If desired, touch
using the touch screen keypad or up/down arrow key.
OK
5. Touch .
The Application Selection Screen will be restored.
OK
6. Touch on the Application Selection Screen.
The Basic Screen will be restored.
7. Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
8. Position original(s) FACE UP in the document feeder or FACE
DOWN on the platen glass.
For details on positioning originals, see p. 3-70.
START
9. Press [
When the finisher / trimmer unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied sets
as they exit; otherwise, mishandled paper will occur.
Page Space Function
Booklet
2 Repeat in Repeat
PAGE SPACE to highlight it, then enter the desired amount
].
Original
Page space
Page space
Page space
11-337