Oce CS520 User Manual page 97

5. Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
6. Position originals FACE UP in the document feeder according to
the original direction.
• See p. 3-70 for details on positioning originals.
• Use RADF store mode (p. 3-104) when the original count exceeds 100.
START
7. Press [
The machine starts to scan originals, then prints duplex copies when ready for
output.
STOP
Press [
When the finisher / trimmer unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied sets
as they exit; otherwise, mishandled paper will occur.
Making Double-Sided Copies (1)2, 2)2)
].
] to suspend the scanning or printing job. See p. 3-81 for details.
3-97