Function Setting; E.k.c. Function Setting - Oce CS520 User Manual

[4] EKC (Electronic Key Counter) Function Setting

[3] E.K.C. Function Setting

Use this function to turn EKC On or Off and to select whether the copier will stop at
the time the count limit is reached, or after the current copy job is completed.
NOTE:
If EKC Off is selected on the machine with this function previously activated,
copying operation will become available without entering an EKC password,
while the counting function will be suspended.
EKC Setting Menu Screen
Procedure
1 Display the EKC Setting Menu Screen, referring to p. 14-412.
2 Touch [3] E.K.C. function setting
displayed.
3 Touch EKC On
The selected key will be highlighted.
4 Select the desired machine condition when the count limit is reached. The
selected key will be highlighted.
Touch Immediately
In this case, copy conditions selected for the current job will be cleared. To
continue the job using the same user password, change the copy limit of the
password or clear the copy count.
Touch After job
copy limit is reached. Copying job will be unavailable with the message "Copy
limit reached" displayed on the screen.
Touch Warning
The message "Copy limit reached" will be displayed on the screen, while
copying job can be continued.
5 Touch OK to complete the setting and return to the EKC Setting Menu Screen, or
touch CANCEL
6 Touch PREVIOUS SCREEN
to activate EKC or touch
to stop the machine at once when the copy limit is reached.
to stop the machine after the current job is completed, when
only to display a warning message when copy limit is reached.
to cancel.
to restore the Key Operator Mode Screen.
EKC Function Setting Screen
. The EKC Function Setting Screen will be
EKC Off to de-activate EKC.
14-417