Output Mode For Machine With Finisher - Oce CS520 User Manual

Output Mode for Machine with Finisher

Output Mode for Machine with Finisher

Finisher FS-513/FS-606 is equipped with a primary (main) and a secondary (sub)
exit trays. Without using any optional equipment, each exit tray provides the output
modes as described below.
When the Memory switch No. 58 "Finisher operating (Thick)" of the Key
Operator mode is set to prefer image quality, copy speed may become
maximum one-sixth lower depending upon the paper type or specified output
mode. For more detailed information, contact your service representative.
Primay (Main) Tray:
Non-sort mode simply means that the offset-stacker finisher modes are
1
not selected. Copies will be stacked upon exit without being offset by
sorted sets.
Sort mode outputs multiple copies of the original set, having each sorted
2
set offset by 30mm upon exit.
Staple mode offsets and staples each sorted set. Up to 50 sheets (or within
3
5mm thick) can be stapled.
Group mode groups together multiple copies of each original and offsets
4
the sets by 30mm upon exit.
Using Face up mode in combination with the above four modes, simplex copies
exit face up on the exit tray.
Non-sort
Offset by 30mm
3-116
Sort Staple-sort
1 oblique
staple
Example:
Make 3 copied sets
from 4 original sheets
Group
Offset by 30mm