To Scan Originals Into Memory (Store Mode) - Oce CS520 User Manual

To Scan Originals into Memory (Store Mode)

To Scan Originals into Memory (Store Mode)

Store mode allows you to scan all the originals first, then to start a continuous
printing job.
Use RADF store mode to scan a large amount of originals.
Use Platen store mode for originals that cannot be fed through the document feeder
due to thickness, size or condition.
These two modes can be used in combination.
RADF tray capacity is 100; however, more than 100 originals can be scanned
into memory using RADF store mode.
Specification for Store Mode
/ Incompatible with RADF store mode: Image Insert, Storing image in Overlay
Memory
1. Make copying selections, as desired.
When starting a new copying job, be sure to close the RADF securely, then
AUTO RESET
press [
STORE
2. Touch
3. Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
4. Position original(s).
Using platen glass:
Place original FACE DOWN. Start scanning from the first page.
When Dual Page, Non-Image Area Erase, Auto detection mode of Repeat, or
AUTO Layout is selected, keep the RADF open throughout the scanning
procedure.
3-104
].
on the Basic Screen to highlight it.