Setting E.k.c. Function - Oce CS520 User Manual

Setting E.K.C. Function

Setting E.K.C. Function

Make the following Key Operator settings concerning the E.K.C. function using the
web browser on a PC.
- E.K.C. Data Add (see step
Add a new E.K.C. data (password, name, and copy limit) to the E.K.C. list.
- E.K.C. Data List (see step
Change or delete the E.K.C. data (password, name, or copy limit) in the list, or
reset the counters.
- E.K.C. Function Setting (see step
Specify the following E.K.C. function settings.
Switching the E.K.C.: ON/OFF
Effect when the copy limit is reached: Immediately / After job / Warning
E.K.C. password: 8 digits / under 8 digits
E.K.C. password input timing: Auto reset timer/ Complete job
Wrong E.K.C. password (from printer): Accept / Reject
The above settings can also be made on the machine itself, except for the
Wrong E.K.C. password (from printer) setting. Some settings may require
operations on the machine. Refer to pages 14-12 and 14-37.
1. Open the Web Utilities window.
Environment Setup
2. Click on [
3. Display the E.K.C. Function Setting window.
Enter the 4-digit Key Operator password, then click on [
The Environment Setup menu window will be displayed.
Click on [ E.K.C. function setting
10-266
4 .)
5 .)
6 .)
].
].
Apply ].