Oce CS520 User Manual page 311

Dividing an Image into Right and Left Pages (Dual Page)
7. Select the desired copy mode and magnification.
• Available paper size is A4.
• When selecting Facing pages mode and scanning from the platen glass,
select 1)1 or 1)2 copy mode.
• APS and AMS are released and 1.000 magnification is selected
automatically. Change the magnification manually, if desired.
8. Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
9. Position original(s).
When using platen glass to scan, position the first page FACE DOWN with
document feeder kept open.
When using document feeder, position original(s) FACE UP.
For details on scanning originals in Front cover + Facing pages and Front/Back
Cover + Facing pages mode, see the description on the following page.
START
10. Press [
11. Repeat steps
When using platen glass, Non-Image Area Erase and AUTO Layout are
automatically selected.
DO NOT CLOSE the document feeder throughout the scanning job.
STORE
12. Touch
START
13. Press [
The copier will start printing when ready for output.
When the finisher / paper exit tray capacity is exceeded due to the
print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
Scanning Original for Cover
Use platen glass for scanning original for cover.
1 Open the document feeder.
2 Position original for front cover FACE DOWN on the platen glass.
3 Press [
4 When Front/Back Cover + Facing pages is selected, scan original for back
cover according to the above steps
5 Use platen glass or document feeder, as required, for scanning body text
originals.
To output the set in the same order as the originals, start scanning from
the first page.
] to scan.
9 10
and for all originals.
to exit the Store mode.
].
START ] to start scanning.
2 and 3 .
11-311