Oce CS520 User Manual page 93

To specify a zoom ratio:
Touch the Vertical/Horizontal zoom key in the ZOOM area to highlight it.
Use the keypad on the popup menu to enter the desired magnification ratio,
then touch OK
The selected ratio will be displayed on the Basic Screen.
• The magnification ratio should be a 4-digit number. Start with 0 if the
magnification ratio is under 1.000.
If an incorrect ratio is entered, continue by entering the correct ratio.
• Use the upper arrow (+) to enlarge, or the lower arrow (,) to reduce the
ratio in 0.1% (0.001) increments.
• To restore the previous setting, touch
3. Select additional copy conditions, as desired.
4. Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
5. Position original(s).
See p. 3-70 for details on positioning originals.
START
6. Press [
Selecting Magnification Ratio (Lens Mode)
.
].
CANCEL
.
3-93