Ekc (Electronic Key Counter) Function Setting - Oce CS520 User Manual

[4] EKC (Electronic Key Counter) Function Setting

[4] EKC (Electronic Key Counter) Function
Setting
The Electronic Key Counter allows you to monitor all copying activity by controlling
EKC password accounts. When the EKC is activated, copying can be performed
only after a valid EKC password is entered.
This feature can track copier usage for individual users and/or accounts as well as
limit copier access to only authorized users. Copy quantity limits for specific
accounts can also be set.
Copy quantity and copy limits for each account can be visually confirmed on the
screen.
If EKC needs to be activated on your machine, contact your service representative.
The following EKC settings can be made by the Key Operator:
[1] E.K.C. data edit:
Assign an account number to an individual user or a group, and specify an EKC
password, name, and copy limit for each. The registered EKC data will be listed on
the screen, allowing you to change the data, reset the copy count, or even delete
the individual account.
[2] E.K.C. all count reset:
Clear the copy count for all accounts.
[3] E.K.C. function setting:
Turn the EKC function on or off, and set conditions to stop immediately, stop after
job is completed or display a warning message when copy limit is reached.
[4] Scanner function setting:
Turn the EKC function on or off while the machine is in Scanner mode. This setting
is available even if the print controller is not installed in the machine.
14-411