Overlaying An Image Onto Each Page Copied In The Job - Oce CS520 User Manual

Overlaying an Image onto Each Page Copied in the Job

OVERLAY
3. Touch
OK
4. Touch on the Stamp/Overlay Selection Screen.
The Application Selection Screen will be restored.
OK
5. Touch on the Application Selection Screen.
The Basic Screen will be restored.
The Store mode is automatically selected.
6. Select the desired paper size and magnification on the Basic
Screen.
APS and AMS are automatically released, and 1.000 (100%) is selected as a
magnification ratio.
7. Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
8. Position the overlaying original.
Position the original FACE UP in the document feeder or FACE DOWN on the
platen glass.
For details on positioning originals, see p. 3-70.
START
9. Press [
The original image will be scanned into memory.
10. Position the original(s) to be overlaid.
Position the original FACE UP in the document feeder or FACE DOWN on the
platen glass.
START
11. Press [
12. Repeat steps
STORE
13. Touch
11-354
.
] to scan.
] to scan.
10 11
and for all originals.
to exit the Store mode, then press [
START
] to print.