Oce CS520 User Manual page 303

Making a Multiple Page Signature Booklet (Booklet)
If the copier is equipped with FS-606 Finisher, Fold or Stitch & Fold output
mode is available. Follow the procedure on p. 11-301 to use the function.
9. Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
10. Position originals FACE UP in the document feeder.
• For details on positioning originals, see p. 3-70.
• Use RADF store mode (p. 3-104) when the original count exceeds 100.
Original pages should be a multiple of 4 in 1-2 mode or a multiple of 2 in 2-2
mode; otherwise blank pages are automatically inserted to the last.
When loading originals, heed the following limits on capacity:
• Fold mode
12 pages or less for simplex copying
6 pages or less for duplex copying
• Stitch & Fold mode
80 pages or less for simplex copying
40 pages or less for duplex copying
Exceeding the above limits on capacity may cause misfeeds in the finisher.
START
11. Press [
When the finisher / paper exit tray capacity is exceeded due to the
print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
When the Booklet / Trimmer unit tray capacity is exceeded, the
finisher / trimmer unit will cease operating. To avoid such trouble,
select an appropriate print quantity from the specifications on p. 12-
365.
The roller drive unit is located inside the Booklet tray of the finisher.
DO NOT put your hand into the roller drive unit when removing
folded or stapled & folded sheets; otherwise, you may be injured.
Selecting Fold / Stitch & Fold Mode
].
11-303