Selecting The Paper Settings; 1Selecting A Paper Type Setting For The Bypass Tray - Oce VarioLink 5022 User Manual

Using copy functions

2.10 Selecting the Paper settings

2.10.1 Selecting a Paper Type setting for the bypass tray
If paper other than plain paper, such as OHP transparencies or special paper,
is loaded in the bypass tray, be sure to change the paper type setting as
described below.
Note
The other trays than the bypass tray only accept paper of the weight from 16 lb
to 24 lb, therefore, can be loaded with plain, letterhead, colored, recycled, or user
paper within the above range of paper weight. A paper type for the other trays
than the bypass tray can be selected in the User setting. For details, refer to the
User's Guide [Copy Operations].
Reminder
If special paper is loaded into the bypass tray, be sure to select the corresponding
paper type, otherwise a paper misfeed may occur.
1
In the Basic screen, touch [Paper].
The Paper screen appears.
VarioLink 5022/VarioLink 4222/VarioLink 3622
2
2-26