Oce CS520 User Manual page 205

Adjusting Sharpness and Contrast / Selecting Gloss Mode
When the Gloss mode is specified, copy speed may vary depending on
paper weight as follows:
2
64 g/m
106 g/m
For more detailed information, contact your service representative.
3. Select the desired sharpness level.
Touch SHARPNESS , then touch the desired level key from -1 to -4 to make the
outline softer, or from +1 to +4 to make it sharper.
Touch STD. to select the middle level.
Touch OK .
• To resume the previous setting, touch
• Use Adjustment Proof Copy to check the adjustment result. See p. 7-192.
4. Select the desired contrast level.
Touch CONTRAST , then touch the desired level key from -1 to -4 to decrease
the contrast, or from +1 to +4 to increase the contrast.
Touch STD. to select the middle level.
Touch OK .
To resume the previous setting, touch
2
to 105 g/m : One-second
2 2
to 256 g/m : One-third
CANCEL .
CANCEL .
7-205