Setting Initial Setting Value Of Fax Function (Default Scan/Fax Setting); Default Scan/Fax Settings - Oce cm5520 User Manual

Utility mode
10.5 Setting initial setting value of fax function (Default
Scan/Fax Setting)
Initial setting value of Fax/Scan function can be set.
Fax/Scan function selected when main power supply is turned on or [Reset]
key is pressed, can be set.
Default Scan/Fax Settings: Current Setting/Factory Default*
- [Current Setting]
Each item set on the touch panel is registered as initial setting of Fax/
Scan function before entering on the Utility mode.
- [Factory Default]
The Factory Default is registered in initial setting of Fax/Scan function.
* is a default value at the time of procurement.
Note
For this setting, display the Fax/Scan screen and then press the [Utility/
Counter] key.

Default Scan/Fax Settings

1
Refer to "Displaying User Settings screen" on page 10-3 and display
user settings screen.
– Some items may not be displayed according to setting options.
2
Touch [Scan/Fax Settings].
– In the Utility mode, the number displayed on button can be entered
and selected with the keypad. In case of [Scan/Fax Settings], enter
[4] with the keypad.
cm5520
10
10-25