Initial Setting; Copy Initial Setting - Oce CS655 Pro Administrator's Manual

5
5.3

02 Initial Setting

5.3.1

01 Copy Initial setting

Besides the factory default setting (Full Auto), you may set the copying condition as the initial setting as
desired.
To specify the copy conditions set here to be used as the initial setting when the Reset function is used, select
[User Setting \ 01 System Setting \ 04 Reset Setting \ 02 Mode Reset Setting], and then select [Initial] for the
Reset button function and [OFF] for the Mode memory auto call.
1
Follow the procedure on page 5-3 to display the User Setting Menu Screen.
2
Touch [02 Initial Setting], and then [01 Copy Initial setting].
3
Set the following setting items in initial conditions: Original Setting, Color, Zoom, Application, Image
Quality, Output Appli., Simplex/Duplex, Paper Setting, and Rotation On/Off.
– Follow the same procedure as setting it on the Copy Screen. Touch [ADF] to select the ADF mode
as the initial setting.
4
Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the System Setting Menu Screen will be restored.
5
If further changes are required, touch the desired key.
5-26
User setting
CS655 Pro