Cylinder Head Disassembly - Husqvarna TE 250 Workshop Manual

Hide thumbs Also See for TE 250:

Table of Contents

ENGINE DISASSEMBLY

Cylinder head disassembly

TE-SMR: remove the coolant fluid temperature sensor with its O-ring.

Remove the two screws on the L.H.S (8 mm wrench) then the front nut under the

cylinder head (13 mm wrench).

Remove the four inner screws on the cylinder head (10 mm wrench) whilst

following a cross-over pattern.

Remove the cylinder head and relative gasket.

Part. N. 8000 B0148 (02-2008)

Show Quick Links

Table of Contents