18 ENGINE
18.3.12
18.3.13
18.3.14
164
Removing the cylinder head
Removing the piston
309233-10
Removing the rotor
O.
Remove screw
Unscrew screws @ in a crisscross pattern and remove.
Remove the cylinder head.
-
Take off the dowels. Remove the cylinder head gasket.
Push the cylinder upward.
Info
Only push the cylinder as far up as necessary to take
the piston pin out.
Remove the piston pin retainer
Remove the piston pin.
-
Take off the cylinder and piston.
Push the piston upward out of the cylinder.
Info
If no further work is to be performed on the cylinder
and piston, the piston can remain in the cylinder.
-
Take off dowels@ and cylinder base gasket (s).
O
Remove nut
with the spring washer.
O.