Piston-Cylinder-And-Head Assy Disassembly - Husqvarna CR 125 2011 Workshop Manual

ENGINE DISASSEMBLY
CR 125 2011 - WR 125 2011

Piston-cylinder-and-head assy disassembly

1
Head, cylinder and piston can be disassembled also at an earlier stage, as this
procedure is independent of the disassembly operations carried out so far.
The piston-cylinder-and-head assy removal proves now necessary in order to
separate the crankcase halves.
Loosen the five head sealing screws (1) on cylinder, and collect the washer
underneath.
H06817
Remove head (2), and collect the two outer (3) and inner (4) O-rings.
1
2
NOTE: The O-rings between head and cylinder shall be changed
upon each reassembly.
4
Loosen the four retaining nuts (5) between cylinder and crankcase.
3
5
H06846
Workshop Manual Ed. 06-2011
F.14