Piston-Cylinder-And-Head Assy Disassembly - Husqvarna WRE 125 2011 Workshop Manual

1
H06549
1
2
4
3
5
H06550
ENGINE DISASSEMBLY

Piston-cylinder-and-head assy disassembly

Head, cylinder and piston can be disassembled also at an earlier stage, as this
procedure is independent of the disassembly operations carried out so far.
The piston-cylinder-and-head assy removal proves now necessary in order to
separate the crankcase halves.
Loosen the five head sealing screws (1) on cylinder, and collect the washer
underneath.
Remove head (2), and collect the two outer (3) and inner (4) O-rings.
NOTE: The O-rings between head and cylinder shall be changed
upon each reassembly.
Loosen the four retaining nuts (5) between cylinder and crankcase.
F.14 Ed. 05-2011