NEC Univerge SV8100 Features And Specifications Manual page 2163

UNIVERGE SV8100
Dial this Service Code. . .
1
Except where indicated, dial Service Code from Intercom dial tone (e.g., press idle Speaker first).
675
677
678 + 0~9
679 + 1 (set) or 0 (cancel)
689
700 + extension # + enter
name + Hold
701 + zone (1~9 or 01~64)
801 + zone (0 or 00)
702 + Door Box (1~4 or 1~8)
703 + zone (1~4 or 1~8)
803 + zone (0)
704 + trunk group (1~8 or
1~9 or 001~200)
707
708
709
710
711 + 1 (ICM) or 2 (TRK) +
tone (1~8)
712
Features and Specifications Manual
Table 3-2 Service Codes by Number (Continued)
1
When you . . .
Monitor a room telephone.
Change the COS of another
extension. Must be allowed in
Program 20-13-28.
Change the language of a
display telephone.
Change the ability for a second
call with DID/DISA/DIL.
Transfer a Wireless DECT (SIP)
call when out of range.
Program extension names.
Make an Internal Zone Page.
Make an All Call Internal Page.
Place a call to a Door Box.
Make an External Zone page.
Make an External All Call page.
Place an outside call over a
trunk group.
Override Do Not Disturb or Call
Forwarding.
Step through a Department
Group.
Send a Call Waiting tone to a
busy extension.
Break into another extension
call.
Listen to the incoming ring
choices.
Change the signal type for
calling an extension.
For this feature. . .
Hotel/Motel
(Room Monitor)
Class of Service
Alphanumeric Display
/
Maintenance
Central Office Calls,
Answering
Wireless DECT (SIP)
Name Storing
Paging, Internal
Door Box
External Paging
Central Office Calls,
Placing
Call Forwarding
Do Not Disturb
Department Step
Calling
Call Waiting
Barge-In
Selectable Ring Tones
Intercom
Issue 13.0
Also see
Function Key. . .
-
-
-
-
-
55
21 + zone
22
-
19 + zone
20
02 + group

37
36
33
-
-
-
3 - 9