Table 2-124 Maximum System Capacities For Station Interface Blades - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Each Universal Slot is capable of 24 ports.

The Basic Port Package is limited to one chassis.

The PRTA blades can be programmed as a 4/8/12/16/20/24 port Fractional T1/PRI.

Program 10-39-01 must be Enabled).

If trying to assign an blade which would excede the maximum number of ports for the Basic

Port Package you do not get an error, but it does not let you program the related programs.

The 9.5" chassis can now accommodate two CD-LTA (combo) blades in the universal slots.

Both blades can be viewed and accessed via PC Pro.

The available interface blades and maximum capacities for Universal Slots with the

UNIVERGE SV8100 system are shown in

Station Interface

Table 2-124 Maximum System Capacities for Station Interface Blades

Station Interface

PZ-VM21 with InMail

Compact Flash card

Table 2-125 Maximum System Capacities for Trunk Interface

Table 2-126 Maximum System Capacities for Application Interface

This unit is a daughter board that is

installed on the CD-CP00-US and is

used for the VRS or InMail Compact

This 8-port Digital Line Blade

contains eight circuits. Each circuit

can support any Attendant Console,

multiline terminal, or Single Line

Telephone adapter.

This blade is installed in slots 2~6 of

a chassis with CPU and slots 1~6 of

expansion chassis. The maximum

number depends on other station

blades installed. This blade shares

the total number of extension ports in

No more than 80 DLC ports are

supported in a single chassis.

Table 2-124 Maximum System Capacities for

Maximum Capacities

UNIVERGE SV8100

Universal Slots