NEC Univerge SV8100 Features And Specifications Manual page 2040

Issue 13.0
Program
Program Name
Number
16-01-04 Department Group Basic Data
Setup – Hunting Mode
16-01-05 Department Group Basic Data
Setup – Extension Group All
Ring Mode Operation
16-01-06 Department Group Basic Data
Setup – STG Withdraw Mode
16-01-07 Department Group Basic Data
Setup – Call Recall Restriction
for STG
16-01-09 Department Group Basic Data
Setup – Department Hunting No
Answer Time
16-01-10 Department Group Basic Data
Setup – Enhanced Hunt Type
16-02-01 Department Group Assignment
for Extensions
20-02-09 System Options for Multiline
Telephones – Disconnect
Supervision
2 - 2006
Description/Comments
Set the action taken when a call
reaches the last extension in the
department group. Hunting is
stopped or circular search
continues.
Determine whether calls ringing a
Department Group should ring all
extensions in the group
simultaneously automatically or
manually when using the service
code defined in Program 11-12-09.
When set to 1, only ICM and DID
calls ring all stations in the
Department Group.
Set the STG Withdraw Mode for
each department group.
Determine whether or not an
unanswered call transferred to a
Department Group should recall
the extension from which it was
transferred.
Set the time a call rings a
Department Group extension
before hunting occurs.
Set the type of hunting for each
Extension (Department) Group.
Set up the Department Group
called by the pilot number and the
extension priority when the group
is called.
Call Pickup Groups are set up in
Program 23-02.
Enable/Disable disconnect
supervision for the system trunks.
UNIVERGE SV8100
Assigned Data
1
0 = Last extension is
called and hunting is

stopped
1 = Circular
(default = 0)
0 = Manual
1 = Automatic
(default = 0)

0 = Disable (Camp On)
1 = Enable (Overflow

Mode)
(default = 0)
0 = Disable (Recall)
1 = Enable (No Recall)

(default = 0)
64800 (seconds)

(default = 15)
0 = No queuing
1 = Hunting When
Busy
2 = Hunting When Not

Answered
3 = Hunting When
Busy or No Answer
(default = 0)
Department Groups
1~64
Priority 1~999
Default = All
extensions in
Department Group 1
with priority in port
order:
Port 1 priority = 1
Port 256 priority = 256
0 = Disable
1 = Enable
(default = 1)
Voice Mail Integration (Analog)
Level
2 3

