NEC Univerge SV8100 Features And Specifications Manual page 1903

UNIVERGE SV8100
Program
Program Name
Number
47-02-07 SV8100 InMail Station Mailbox
Options – Recording
Conversation Beep
47-02-08 SV8100 InMail Station Mailbox
Options – Message Waiting
Lamp
47-02-09 SV8100 InMail Station Mailbox
Options – Auto Attendant Direct
to Voice Mail
VM8000 InMail
Description/Comments
Enable/Disable the Conversation
Record beep. If enabled, all
parties on a call hear the voice
prompt Recording followed by a
single beep when the extension
user initiates Conversation
Record. If disabled, the voice
prompt and beep do not occur.
When you disable the
Conversation Record beep, the
following voice prompts do not
occur while VM8000 InMail
records the conversation:
Recording (followed by a beep)
That mailbox is full (if the mailbox
message storage capacity is
reached)
You have reached the recording
limit (if the recorded message is
too long)
The SV8100 telephone system
software provides an additional
Conversation Record beep. This
beep repeats according to the
setting of Program 45-01-06:
Voice Mail Integration Options:
Record Alert Tone Interval Time.
Enable/Disable Message Waiting
lamp at the extension associated
with the Subscriber mailbox. For
Subscriber Mailboxes, you should
enable this option. For Guest
Mailboxes, you should disable it.
Enable/Disable Auto Attendant Do
Not Disturb. When a subscriber
enables this option, an Automated
Attendant caller routes directly to
the mailbox, hears the greeting,
and is asked to leave a message.
A subscriber can also enable this
option while recording their
mailbox greeting.
Assigned Data
1
0 = Disable
1 = Enable
(default = 1)
0 = Disable
1 = Enable
(default = 1)
0 = Disable
1 = Enable
(default = 0)
Issue 13.0
Level
2 3



2 - 1869