NEC Univerge SV8100 Features And Specifications Manual page 2123

UNIVERGE SV8100
Program
Program Name
Number
20-06-01 Class of Service for Extensions
20-13-01 Class of Service Options
(Supplementary Service) – Long
Conversation Alarm
20-21-01 System Options for Long
Conversation – Long
Conversation Alarm 1
20-21-02 System Options for Long
Conversation – Long
Conversation Alarm 2
20-28-01 Trunk to Trunk Conversation –
Conversation Continue Code
20-28-02 Trunk to Trunk Conversation –
Conversation Disconnect Code
20-28-03 Trunk to Trunk Conversation –
Conversation Continue Time
21-01-01 System Options for Outgoing
Calls – Seizure Trunk Line Mode
21-01-03 System Options for Outgoing
Calls – Trunk Interdigit Time
(External)
Warning Tone for Long Conversation
Description/Comments
Assign a Class of Service (1~15)
to an extension.
Turn Off or On the Warning Tone
for Long Conversation (not for
single line telephones).
After a user places a trunk call, the
system sends the first warning
tone to their extension after this
time.
After hearing the first warning
tone, the system sends additional
warning tones after this time. The
warning tones continue, spaced by
this time, until the user hangs up.
Enter a single digit Continue Code
for the DISA call to use to
immediately disconnect or
continue their outside call.
Enter a single digit Disconnect for
the DISA call to use to
immediately disconnect or
continue their outside call.
When Program 14-01-25 is
enabled, determine the time a call
is extended when the user dials
the Continue code defined in
Program 20-28-01.
Select the trunk based on the
Trunk Route Priority (0) or based
on the trunk that has not been
used in the longest time (1).
The system waits for this time to
expire before placing the call in a
talk state (Call Timer starts after
time expires. Voice Over and
Barge-In are not allowed until after
time expires).
Assigned Data
1
Day/Night Mode: 1~8
Class of Service for
Extensions: 1~15
Defaults:

Extension number 101
as Class 15.
All other extension
numbers are set as
Class 1.
0 = Off
1 = On

(default = 0 for
COS 1~15)
0~64800 (seconds)
(default = 170)
0~64800 (seconds)
(default = 180)
0~9, #, 
(default not assigned)

0~9, #, 
(default not assigned)

0~64800 (seconds)
(default = 0)

0 = Priority Route
1 = Circular Route
(default = 0)
0~64800 (seconds)
(default = 5)
Issue 13.0
Level
2 3




2 - 2089