NEC Univerge SV8100 Features And Specifications Manual page 2188

Issue 13.0
To program a key, press Speaker, dial 751 (for 2-digit codes) or 752 (for 3-digit codes),
For this feature...
Voice Response
System (VRS)
(Park and Page)
(Personal
Greeting)
Voice Mail
Voice Over
3 - 34
Table 3-4 Function Key Codes by Feature (Continued)
press the key and enter the code (e.g., 48 for Voice Over).
Use this key...
Code: 17
Operation: Press key
+ device type code +
requested data
(depends on device
selected).
Code: 83 + code (0~4)
Operation: Press key
Code: 77 + extension
or Message Center
number
Operation: Press key
Code: 78 + 0
Operation: Set up call
+ Press key
Code: 48
Operation: Hear
Off-Hook Signaling
tone + Press key
When you ...
Set up Call Forwarding
Off-Premise, Selectable
Display Messaging, VRS
Park and Page or VRS
Personal Greeting.
Use Voice Mail Service.
Call Voice Mail or
leave a message.
Use Voice Mail Record.
Initiate or respond to
Voice Over.
UNIVERGE SV8100
Also See
Key Lamp Status
Srvc Code
Flashes red
Flashes slowly
when monitoring
Flashes green on
your key for your
messages or
flashes red for the
Message Center
Slow Flash red
when active
On red when
responding Hold
Flash red when
listening
Codes Tables
4

-
8

or
8
-
6