NEC Univerge SV8100 Features And Specifications Manual page 1888

Issue 13.0
Transfer
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
10-09-01 DTMF and Dial Tone Circuit
Setup
11-07-01 Department Group Pilot
Numbers – Dial
11-12-08 Service Code Setup (for Service
Access) – Barge-In
11-12-52 Service Code Setup (for Service
Access) – Live Monitoring
(SV8100 InMail)
14-01-22 Basic Trunk Data Setup – Caller
ID to Voice Mail
2 - 1854
Description/Comments
Assign at least one circuit for
DTMF reception ( 0 or 1).
Use the following as a guide when
allocating DTMF receivers:
In light traffic sites, allocate one

DTMF receiver for every 10
devices that use them.
In heavy traffic sites, allocate

one DTMF receiver for every
five devices that use them.
Assign a Department Group pilot
number for the Voice Mail (eight
digits maximum). The extensions
are assigned to the group in
Program 16-02-01.
Customize the Service Codes
used for barge-in service.
Define access code used for
InMail Live Monitoring (VRS).
Enable/Disable the system ability
to send the Caller ID digits to voice
mail.
UNIVERGE SV8100
Assigned Data
1
0 = Common Use
1 = Extension Only
2 = Trunk Only
Default:
Circuit/Resource
01~08 = 1 (Extensions)
Circuit/Resource
09~32 = 2 (Trunks)
Circuit/Resource
33~96 = 0 (Not Used)
Circuit/Resource
97~160 = 0 (Common)
When PZ-BS10 is
installed, 97~160 are
available.
Up to eight digits
(default not assigned)

MLT, SLT
(default = 710)
MLT
(default not assigned)
Trunks 1~200
0 = Disable

1 = Enable
(default = 0)
VM8000 InMail
Level
2 3


