NEC Univerge SV8100 Features And Specifications Manual page 2177

UNIVERGE SV8100
For this feature...
1
Except where indicated, dial Service Code from intercom dial tone (e.g., press idle Speaker first).
Toll Restriction, Dial
Block
Toll Restriction
Override
Transfer
Transfer
(continued)
Features and Specifications Manual
Table 3-3 Service Codes by Feature (Continued)
Dial this Service Code...
600 + code + 0
601 + code + 0
775 + pswd (0000) + place
outside call
663 + digit code + line +
telephone number
06

07

08

602 + Group number (1~8
or 01~64)
603+ Group number (1~8 or
01~64)
604 + Group number (1~8
or 01~64) + mode +
extension
605 + Group number (1~8
or 01~64)
606 + Group number (1~8
or 01~64)
607 + Group number (1~8
or 01~64)
608 + Group number (1~8
or 01~64)
624 + Extension number
782
1
When you ...
Use Dial Block.
As a supervisor use Dial Block.
Temporarily override an extension
Toll Restriction.
Override Toll Restriction.
Set the Automatic Transfer for each
trunk line.
Cancel the Automatic Transfer for
each trunk line.
Set the Destination for Automatic
Trunk Transfer.
Set Automatic Transfer Setup for
each extension group.
Cancel Automatic Transfer Setup
Set the destination for Automatic
Transfer Setup for each extension
group.
Set Delayed Transfer for each
extension group.
Cancel Delayed Transfer.
Set up DND for each extension group.
Cancel DND for each extension
group.
Transfer a call into an existing call.
Transfer a call to the VRS. This can
be used also to route ANI/DNIS to the
VRS.
Issue 13.0
Also see
Function
Key...
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
3 - 23