NEC Univerge SV8100 Features And Specifications Manual page 1845

UNIVERGE SV8100
Program
Program Name
Number
44-06-01 Additional Dial Table
44-07-01 Gain Table for ARS/F-Route
Access – Incoming Transmit
44-07-02 Gain Table for ARS/F-Route
Access – Incoming Receive
44-07-03 Gain Table for ARS/F-Route
Access – Outgoing Transmit
44-07-04 Gain Table for ARS/F-Route
Access – Outgoing Receive
44-08-01 Time Schedule for ARS/F-Route
Uniform Numbering Network
Description/Comments
Set the additional dial table to add
prior to the dialed ARS/F-Route
Number. The Additional Dial
Table used is determined in
Program 44-05-03. Define the
additional dial table (1~1000) to
add digits in front of the dialed
ARS/F-Route number.
Set the gain table to be used
(1~500). If an extension dials
ARS/F-Route number;
The Extension Dial Gain Table
assigned in Program 44-05 is
activated.
The Extension Dial Gain Table
follows Outgoing transmit and
Outgoing receive settings.
If the incoming call is transferred
to another line using ARS/
F-Route; the Tandem Gain Table
assigned in Program 44-05 is
activated.
The Tandem Gain Table follows
the Incoming transmit and
Incoming receive settings for
incoming line, and Outgoing
transmit and Outgoing receive
settings for the outgoing line.
For ARS/F-Route calls, the
CODEC gains defined in Program
14-01-02 and Program 14-01-03
are not activated.
Define the daily pattern of the
ARS/F-Route feature. ARS/
F-Route has 10 time patterns.
These patterns are used in
Program 44-09 and Program
44-10. The daily pattern consists
of 20 time settings.
Assigned Data
1
Up to 24 digits
Enter: 1~9, 0, , #,
Pause (press line key 1
to enter a pause)
(default = No Setting)
1~63
(-15.5 ~ +15.5dB)
(default = 32)
1~63
(-15.5 ~ +15.5dB)
(default = 32)
1~63
(-15.5 ~ +15.5dB)
(default = 32)
1~63
(-15.5 ~ +15.5dB)
(default = 32)
Time Number: 01~20
Start Time =
0000~2359
End Time =
0000~2359
Mode: 1~8
Default = All Schedule
Patterns: 0:00 – 0:00,
Mode 1
Issue 13.0
Level
2 3






2 - 1811