NEC Univerge SV8100 Features And Specifications Manual page 2145

UNIVERGE SV8100
Program
Program Name
Number
84-19-27 SIP Extension CODEC
Information Basic Setup – RX
Gain
84-19-28 SIP Extension CODEC
Information Basic Setup – Audio
Capability Priority
84-19-31 SIP Extension CODEC
Information Basic Setup – DTMF
Payload Number
84-19-32 SIP Extension IP CODEC
Information Basic Setup – DTMF
Relay Mode
84-19-33 SIP Extension IP CODEC
Information Basic Setup –
Number of G.722 Audio Frames
84-19-34 SIP Extension IP CODEC
Information Basic Setup – G.722
Voice Activity Detection Mode
84-19-35 SIP Extension IP CODEC
Information Basic Setup – G.722
Jitter Buffer (min)
84-19-36 SIP Extension IP CODEC
Information Basic Setup – G.722
Jitter Buffer (Average)
84-19-37 SIP Extension IP CODEC
Information Basic Setup – G.722
Jitter Buffer (Max)
Wireless DECT (SIP)
Description/Comments
Define RX Gain Values – Adjusting
this value increases or decreases
volume levels for the sending
party. Consult the UNIVERGE
SV8100 Programming Manual for
Transmit Gain scale to set
acceptable value.
Define Audio Capability Priority.
Define the DTMF Payload
Number.
Select the DTMF Relay Mode.
Define the number of Audio
Frames for G.722 CODEC.
Enable/Disable the G.722 Voice
Activity Detection Mode.
Define the minimum setting for the
G.722 Jitter Buffer.
Define the average setting for the
G.722 Jitter Buffer.
Define the maximum setting for
the G.722 Jitter Buffer.
Assigned Data
1
0~40 =
(-20dBm ~ +20dBm)
0 = -20 dBm
1 = -19 dBm
:
20 = 0 dBm
:
39 = +19 dBm
40 = +20 dBm
(default = 20)
0 = G.711_PT
1 = G.723_PT
2 = G.729_PT
3 = G.722
4 = G.726
5 = Not Used
(default = 0)
96~127
(default = 96)
0 = Disable
1 = RFC2833
(default = 0)
1~4
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
(default = 3)
0 = Disable
1 = Enable
(default = 0)
0~160ms
(default = 30)
0~160ms
(default = 60)
0~160ms
(default = 120)
Issue 13.0
Level
2 3









2 - 2111