NEC Univerge SV8100 Features And Specifications Manual page 2119

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
15-02-27 Multiline Telephone Basic Data
Setup – Handset Volume
Operation
To adjust the volume of incoming ringing and splash tone:
1. If the telephone is idle, press Speaker and dial 729. If the telephone is ringing, skip to Step 2.
2. Press VOLUME  or VOLUME .
To adjust the volume of ringing incoming Paging announcements, Handsfree, the handset or
Background Music:
1. Press VOLUME  or VOLUME .
The feature must be active to change the volume. Press the volume keys when the telephone is idle to adjust the

display contrast.
Volume Controls
Description/Comments
Determine how an extension
handset volume is set after it is
adjusted during a call.
When 1 is assigned , and a user
sets the volume to maximum, it is
reset to a level to meet FCC
standards when the user hangs
up.
Assigned Data
1
0 = Back to Default
(Back)
1 = Stay at previous
level (Stay)
(default = 1)
Issue 13.0
Level
2 3

2 - 2085