NEC Univerge SV8100 Features And Specifications Manual page 1991

UNIVERGE SV8100
Required Component(s)
None
Related Features
None
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
14-01-13 Basic Trunk Data Setup –
Trunk-to-Trunk Transfer
20-11-14 Class of Service Options (Hold/
Transfer Service) –
Trunk-to-Trunk Transfer
Restriction
47-02-24 SV8100 InMail Station Mailbox
Options – All Find-Me Follow-Me
Enabled
47-06-22 Group Mailbox Subscriber
Options – All Find-Me Follow-Me
Enabled
VM8000 InMail – Find-Me Follow-Me
Description/Comments
Enable/Disable loop supervision
for the trunk.
Make sure this option is disabled
or Find-Me Follow-Me will not work
for CO calls.
Use this option to enable or
disable Find-Me Follow-Me for the
extension. If disabled, enabling the
individual notification entries has
no effect.
Use this option to enable or
disable Find-Me Follow-Me for the
group mailbox. If disabled,
enabling the individual notification
entries has no effect.
Assigned Data
1
0 = Disabled
1 = Enabled
(default = 1)
0 = Disabled
1 = Enabled
(default = 0)
0 = Disabled
1 = Enabled

(default = 0)
0 = Disabled
1 = Enabled
(default = 0)
Issue 13.0
Level
2 3



2 - 1957